Performing Basic Operations - Brother P-touch PT-9400 User Manual

Ch. 3 Functions Ch. 3 F Ch. 3 F Ch. 3 F unctions unctions unctions

Performing basic operations

Although most functions can be used just by
pressing their keys, the following keys may be
needed with certain functions.
Code
Code ( )
To use a function printed in yellow on a key,
Code
hold down while pressing the key for the
function that you wish to use.
Enter ( )
New Block
To select a function from a menu or an item
from a list, or to apply the selected setting, press
.
New Block
Cancel
Cancel ( )
To quit a function without applying any changes
that you may have made, press
Cursor keys
The four cursor keys (
can be used to perform two operations: to move
the cursor, which appears as either a bracket ([)
or an underline (_), or to make a selection.
(right)
To move the cursor one space or character
to the right, press
at the end of a line when this key is pressed,
the cursor moves to the beginning of the
next line.
To move the cursor to the end of the current
line of text, hold down
To move the cursor to the beginning of the
next text block, hold down
press .
To select the item on the right in a list, press
.
32
Cancel
.
, , , and )
once. If the cursor is
Code
and press .
Shift
and
(left)
To move the cursor one space or character
to the left, press once. If the cursor is at
the beginning of a line when this key is
pressed, the cursor moves to the end of the
previous line.
To move the cursor to the beginning of the
current line of text, hold down
press .
To move the cursor to the beginning of the
current text block, hold down
press . If the cursor is already at the
beginning of a text block when these keys
are pressed, the cursor moves to the begin-
ning of the previous block.
To select the item on the left in a list, press
.
(up)
To move the cursor to the character in the
line directly above the cursor's current posi-
tion, press once.
To move the cursor to the beginning of the
entire text, hold down
To select the item above in a menu or list,
press .
(down)
To move the cursor to the character in the
line directly below the cursor's position,
press once.
To move the cursor to the end of the entire
Code
text, hold down and press
To select the item below in a menu or list,
press .
Code
and
Shift
and
Code
and press .
.