Brother P-touch PT-9400 User Manual page 49

5 Press
once to confirm the setting.
New Block
If SMALL or LARGE was selected, type in
the desired text, change the font by press
until the desired font setting is dis-
Font
played, and then press
MAT menu appears again.
NOTE
Up to 20 characters can be entered. Symbols
(see pages 35 and 36) and accented characters
(see page 33) can also be added.
To display an enlarged view of the character or
symbol above the cursor, press
key to continue editing the text.
To return to the previous screen without keep-
ing any changes, press
Back-
Caps Alt Template Zoom ground
[ ]:CONFIRM
BACKGROUND
TEXT INPUT
(FONT:HELSI)
A
Style
If a pre-made background design was
selected, the FORMAT menu appears again.
6 Press
again to apply the setting. The
New Block
Background indicator lights up.
. The FOR-
New Block
Zoom
. Press any
Image
Cancel
.
Half
Cutter
1
36mm 1/2"
1"
24mm
18mm 3/4"
12mm
1/2"
9mm 3/8"
6mm
1/4"
Italic Vertical
Template ( Templt )
The Template function makes creating a label or
stamp quick and easy. After selecting one of the
various pre-formatted templates, simply change
the text, and then it is ready to be printed. The
many templates available are useful for com-
—
mon needs from addressing envelopes to
identifying floppy disks or audio and video cas-
settes. The tape width and length of each label
printed from a template is preset. Refer to the
samples of the available templates on pages 13
to 16.
After the text is entered, the style of the text can
easily be changed just by selecting one of the 7
available style formats. Refer to page 17 for
samples of the style formats.
To create a label or stamp from a template:
1 Press
Templt
. The Template indicator lights
up.
NOTE
If there was text in the display when the Tem-
plate function was started, the message "OK TO
CLEAR TEXT BUFFER?" appears.
To delete the text, press
moves beside OK, and then press
To return to the text without deleting it, press
Cancel
(or move ü beside CANCEL, and then
press ).
New Block
To return to the previous screen, press
Caps Alt Template Zoom
[ ]:CONFIRM
TEMPLATE
TEMPLATE NO.
ADDRESS
EQUIPMENT
PLATE
NAMEPLATE
A
Style
Ch. 3 F Ch. 3 Functions Ch. 3 F Ch. 3 F unctions unctions unctions
until ü
or
.
New Block
Cancel
.
Back- Half
ground Cutter
1
36mm 1/2"
1"
24mm
18mm 3/4"
12mm
1/2"
9mm 3/8"
6mm
1/4"
Italic Vertical
59