Brother P-touch PT-9400 User Manual page 52

Ch. 3 Functions Ch. 3 F Ch. 3 F Ch. 3 F unctions unctions unctions
To print a label or stamp created using a tem-
plate:
E Press
or
PRINT.
F Press
.
New Block
NOTE
Be sure that the correct tape cassette is installed.
When printing a stamp, install a stamp film
cassette.
When printing a label, install a label tape cas-
sette.
If a template other than one from the
STAMP category was used, the following
display appears.
Caps Alt Template Zoom
OK TO PRINT?
!
OK
OPTION
CANCEL
A
Style
If a template from the STAMP category was
used, the following display appears.
Caps Alt Template Zoom
OK TO PRINT?
!
PRINT STAMP
PRINT LABEL
CANCEL
A
Style
62
until ü moves beside
Back-
Half
ground
Cutter
1
36mm 1/2"
24mm
3/4"
18mm
12mm 1/2"
3/8"
9mm
6mm 1/4"
Italic Vertical
Back- Half
ground Cutter
1
36mm 1/2"
1"
24mm
18mm 3/4"
12mm
1/2"
9mm 3/8"
6mm
1/4"
Italic Vertical
G Press
or
desired setting.
For a label created using a template other
than one from the STAMP category:
To print, select OK. Refer to page 67 for
more details on printing.
To change the printing options, select
OPTION. Refer to pages 67 through 72
for more details on the printing options.
For a stamp created using a template from
the STAMP category:
To print out a stamp stencil, select
PRINT STAMP.
To print an identification label, select
PRINT LABEL.
NOTE
Use 1/2" (12-mm)-wide tape to make an identifica-
tion label for a stamp with a STAMP M size and use
3/4" (18-mm)-wide tape to make a label for a stamp
1"
with a STAMP L size.
H Press
New Block
To store the label or stamp created using a tem-
plate:
I Press
or
FILE.
J Press
New Block
Caps Alt Template Zoom
[ ]:CONFIRM
FILE
NEW
SAVE AS
SAVE
Style
until ü moves beside the
.
until ü moves beside
.
Back- Half
ground Cutter
36mm
24mm
18mm
12mm
9mm
6mm
A
Italic Vertical
1
1/2"
1"
3/4"
1/2"
3/8"
1/4"