4.1 Main Tab
The "Main" tab provides a list of powerline adapters connected to the network. The
upper panel displays local powerline adapters. The lower panel displays remote powerline
adapters in the network.
Connect
Rename
Enter Password
Add
Scan
Chapter 4: Using the Utility Software
Click "Connect" and the utility software will scan for other
local powerline adapters.
Select a device and click "Rename" to rename the device.
By default, this column is blank. Select a device and click
"Enter Password" to set up a password for the device.
This button is used to add a remote powerline adapter to
the existing network.
Click "Scan" and the utility software will perform an
immediate scan of other remote powerline adapters. By
default, the utility automatically scans every few seconds.
13