Assembly Instructions - Central Machinery 95105 Set Up And Operating Instructions Manual

Tire Inflation Unit
1. Connect the orange Air Hose (506) to the Air Inlet (when facing fittings, viewed on
left side) of the Tire Inflation Unit, and to the Main Unit Air outlet. For these steps,
refer to Figures C and D.
Refer to connector labels on each unit. Hose connectors snap on.
2. Connect the blue N
ing fittings), and to the Main Unit N
3. Connect the air supply hose (not supplied) from the air compressor (not supplied) to
the Filter - Regulator (10) on the Main Unit. See Figure D, left-side.
4. Optionally, if an additional, larger N
the rear of Main Unit labeled N
Filter-Regulator (10)
Hose Connection from
Air Compressor
SKU 95105
Main Unit
Figure c

ASSEMBLy INSTRucTIONS

Hose (505) to the Tire Inflation Unit N
2
Outlet.
2
supply tank is required, it can be connected to
2
Outlet. The hose for this connection is not supplied.
2
Main Unit (front)
Hose Connections
Figure D
For technical questions, please call 1-800-444-3353
Air Outlet
N Outlet
2
Blue N Hose (505)
2
Orange Air Hose (506)
Inlet (right side when fac-
2
Main Unit (rear)
Extra N Tank
2
Connection
Page 8