Table of Contents
Advertisement
Function
Power Requirement
Nitrogen Output
Nitrogen Input
Air Inlet Pressure
Power Switch
Power Indicator
Tire Inflator
Overall Dimensions
Weight
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
READ AND uNDERSTAND ALL INSTRucTIONS. Failure to follow all
instructions listed below may result in electric shock, fire, and/or serious
injury.
1.
Keep your work area clean and well lit.
accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
3.
Distractions can cause you to lose control. Protect others in the work area from de-
bris such as chips and sparks. Provide barriers or shields as needed.
1.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
2.
Do not expose power tools to rain or wet conditions.
tool will increase the risk of electric shock.
SKU 95105
SpEcIFIcATIONS
Inflates tires with nitrogen instead of air
110 VAC, 60 Hz, 234 watts
85 PSI from 3 internal tanks (50 liter total capacity)
Rear connector for external tank
130 to 140 PSI
Toggle: On/Off
LED Lights when Power Switch is on.
Pressure gauge with tire chuck hose
39-5/8 (H) x 13-3/4 (D) x 25-5/8 (W) inches;
4 inch floor clearance
174 lb.
Save This Manual
GENERAL SAFETy RuLES
WARNING!
SAVE THESE INSTRucTIONS
Work Area
Electrical Safety
For technical questions, please call 1-800-444-3353
Cluttered benches and dark areas invite
Water entering a power
Page 2
Advertisement
Table of Contents
