Table of Contents
Advertisement
3.
Grounded tools must be plugged into an outlet properly installed and ground-
ed in accordance with all codes and ordinances. Never remove the grounding
prong or modify the plug in any way. Do not use any adapter plugs. check
with a qualified electrician if you are in doubt as to whether the outlet is prop-
erly grounded. If the tools should electrically malfunction or break down, grounding
provides a low resistance path to carry electricity away from the user.
4.
Double insulated tools are equipped with a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install a polarized outlet. Do not change the plug in any
way. Double insulation
cord and grounded power supply system.
5.
Do not abuse the power cord.
an outlet. Keep the power cord away from heat, oil, sharp edges, or moving
parts. Replace damaged power cords immediately. Damaged Power Cords
increase the risk of electric shock.
6.
When operating a power tool outside, use an outdoor extension cord marked
"W-A" or "W". These extension cords are rated for outdoor use, and reduce the
risk of electric shock.
1.
Stay alert. Watch what you are doing, and use common sense when operat-
ing a power tool. Do not use a power tool while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating power
tools may result in serious personal injury.
2.
Dress properly. Do not wear loose clothing or jewelry. contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3.
Avoid accidental starting.
Plugging in power tools with the Power Switch on, invites accidents.
4.
Do not overreach. Keep proper footing and balance at all times.
and balance enables better control of the power tool in unexpected situations.
5.
use safety equipment. Always wear eye protection.
shoes, hard hat, or hearing protection must be used for appropriate conditions.
1.
Do not force the tool. use the correct tool for your application.
will do the job better and safer at the rate for which it is designed.
2.
Do not use the power tool if the power Switch does not turn it on or off.
tool that cannot be controlled with the Power Switch is dangerous and must be re-
placed.
SKU 95105
eliminates the need for the three wire grounded power
Never use the power cord to the plug from
personal Safety
Be sure the power Switch is off before plugging in.
Tool use and care
For technical questions, please call 1-800-444-3353
Proper footing
Dust mask, nonskid safety
The correct tool
Any
Page 3
Advertisement
Table of Contents
