Table of Contents
Advertisement
3.
Disconnect the power cord plug from the power source before making any
adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
4.
Store idle tools out of reach of children and other untrained persons.
dangerous in the hands of untrained users.
5.
Maintain tools with care. Keep cutting tools sharp and clean.
tained tools with a sharp cutting edge are less likely to bind and are easier to control.
Do not use a damaged tool. Tag damaged tools "Do not use" until repaired.
6.
check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
7.
use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous when
used on another tool.
1.
Tool service must be performed only by qualified repair personnel.
maintenance performed by unqualified personnel could result in a risk of injury.
2.
When servicing a tool, use only identical replacement parts. Follow instruc-
tions in the "Inspection, Maintenance, And Cleaning" section of this manual.
Use of unauthorized parts or failure to follow maintenance instructions may create a
risk of electric shock or injury.
SpEcIFIc SAFETy RuLES FOR THIS pRODucT
1.
Maintain labels and nameplates on the Nitrogen Generator and Inflater.
carry important information. If unreadable or missing, contact Harbor Freight Tools
for a replacement.
2.
Always wear ANSI-approved safety impact eye goggles and heavy work gloves
when using the Nitrogen Generator and Inflater. Using personal safety devices
reduce the risk for injury. Safety impact eye goggles and heavy work gloves are
available from Harbor Freight Tools.
3.
Maintain a safe working environment.
there is adequate surrounding workspace. Always keep the work area free of ob-
structions, grease, oil, trash, and other debris. Do not use a power tool in areas
near flammable chemicals, dusts, and vapors. Do not use this product in a damp or
wet location.
4.
Avoid unintentional starting.
turning on the Nitrogen Generator and Inflater.
5.
Do not force the Nitrogen Generator and Inflater.
and safer at the speed and capacity for which it was designed.
SKU 95105
Service
Make sure you are prepared to begin work before
For technical questions, please call 1-800-444-3353
Keep the work area well lit. Make sure
This tool will do the work better
Tools are
Properly main-
Service or
These
Page 4
Advertisement
Table of Contents
