Operation for the KX-TA308/624/824
Desired Function
1
*
Redial
One-touch
Dialing
Calling an
operator
Speed Dialing
(Personal)
Speed Dialing
(System)
Calling back
a caller using
the Incoming
Call Log
(KX-TA624/
824 only)
1
*
You can use the last number stored in the PBX to make calls (Last Number Redial).
However, in this case the number will not be stored as a new entry in the Outgoing Call Log.
To display the last number you dialed, press
18
To program
0
To dial
0
To store
2
To dial
#
To dial
To program
0
To dial
X
Caller ID Indication—
Personal/Common Key
(0-9, , #)
OR
Caller ID Indication—
Personal/Common Key
* Caller ID is displayed for about 20 seconds. If you press
the display goes blank until the time expires. While Caller ID is displayed or the display is blank,
you can only make a call using a key other than
To return to the standby display, press
Operation
Making Calls
1
X
idle F-Key (0-9, , #)
OR
idle F-Key
X
One-touch Dialing Key (0-9, , #)
OR
One-touch Dialing Key
personal speed
dial no.
personal speed
dial no.
2
system speed dial no.
X
idle F-Key (0-9, , #)
OR
idle F-Key
desired Incoming
Call Log *
then press
.
1
phone no.
2
desired no.
Assign as Caller ID
6
Indication—Personal
Assign as Caller ID
6
Indication—Common
X
Caller ID Indication—
Personal/Common Key
(0-9, , #)
OR
Caller ID Indication—
Personal/Common Key
during that time period,
.
.
#