Control Panel And Settings - GE Profile PDW8000 Series Owner's Manual

General electric dishwasher user manual
Hide thumbs Also See for Profile PDW8000 Series:
Table of Contents

Advertisement

About the dishwasher control panel.
You canlocate gourmodelnumberonthetubwalljust insidethedoor.Throughout thismanual, f eatures and appearance m ay varyfromgout model.
li
0
0
PDW9200 Series-PDW9900
Series
Omm
ENHANCEMENTS
'STATUS
--
_L_
@ tOWDETER_EICT ®DRYIN6
ra_aL_
mess
@ SENSING
® SANITIZED
H_D_
_oRas_
@ W,_HING
CLEAN
El
0
El
Control Settings
O
Status Indicator
Lights (Indicatorsvary by models)
TheStatus display tells you what is happening while the dishwasheris in operation and mag flash,
indicating a malfunction. The lights will come ON indicating the sequence of the dishwasher operation.
LOW DETERGENTDisplayedwhen the SmartDispense
TM
needs to be refilledwith liquid or gel automatic
dishwasher detergent.
NOTE:If you are not usingSmartDispense
TM
and you want to tum the LOW DETERGENT
LEDlight off, pressthe ADDED HEATpad 5 times within 3 seconds.You will hear 3
beeps;then the light will go off.You can turn the light back on bg pressing the ADDED
HEATpad Stimes within 3 seconds.
SENSING Displagedwhile the CleanSensor
T M
is measuring the amount of soil and temperature
of wateEThe dishwasher will adjust the selectedcgcle to achieve optimal performance.
ADD-A-DISH Displaged during prewash, indicating that dishes added now will still be cleaned.
WASHING Displagedduring prewash, main wash and rinseperiods.
RINSING Displaged during rinse periods.
DRYING Displayedduring HEATEDDRY.
SANITIZED Displagedwhen cgcle has met sanitization conditions.
CLEAN Displagedwhen a wash cgcle iscomplete.
O
Time Remaining Displag fansomemodels)
During operation, the displag shows the minutes remaining until the cycle is complete. The displog may
adjust the remaining time while the Sensinglight is on.The time displayed at the start of each cycle may
change from the factory setting us the unit customizesitself to home use. During a delay start, the display
will show hours of time remaining until the cycle starts.
Selections
PDWbO00 Series:Pressthe pad for the desiredwash cycle.
PDWgO00 Series:Usethe Arrow Pods _
_
to scroll through the wash cgcles.
NOTE:All cgcle times and water usage information contained in the following section are approximate
values.Actual resultswill depend on several factors, including but not limited to inlet temperature,
householdwater pressureand amount of soil in the wash wateE
Thelight above or next to the selected pad will be ON to indicate which WASHCYCLE has been selected.

Advertisement

Table of Contents
loading

Table of Contents