Use Netgear Genie After Installation; Upgrade The Firmware - NETGEAR R6100 User Manual

Use NETGEAR genie after Installation

When you first set up your router, NETGEAR genie automatically starts when you launch an
Internet browser on a computer that is connected to the router. If you want to view or change
settings for the router, you can use genie again.
1. Launch your browser from a computer or wireless device that is connected to the router.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter admin for the router user name and password for the router password, both in
lowercase letters.
Note: The router user name and password are different from the user name
and password for logging in to your Internet connection. For more information,
see Login and Access

Upgrade the Firmware

When you set up your router and are connected to the Internet, the router automatically
checks for you to see if newer firmware is available. If it is, a message is displayed on the top
of the screen. For more information, see
Click the message when it shows up, and click the Yes button to upgrade the router with the
latest firmware. After the upgrade, the router restarts.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the
upgrade. For example, do not close the browser, click a link, or
load a new page. Do not turn off the router.
R6100 WiFi Router
on page 13.
Upgrade the Router Firmware
Getting Started
15
on page 71.