View Summary Information; System Screen Fields - NETGEAR N150 WN604 User Manual

Wireless N150 Access Point WN604

View Summary Information

The System screen, which you access through the Monitoring tab, provides a summary of the
current access point configuration settings, including current IP settings and current wireless
settings. This information is read-only, so any changes have to be made on other screens.
To navigate to this screen, select Monitoring > System:

System Screen Fields

This section describes the fields in this screen.
Access Point Information
Access Point Name. Indicates the NetBIOS name. You can change the default name in the
General screen (Configuration > General).
Ethernet MAC Address. The Media Access Control address (MAC address) of the access
point's Ethernet port.
Wireless MAC Address. The Media Access Control address (MAC address) of the access
point's wireless card.
Country/Region. The domain or region for which the access point is licensed for use. It
might not be legal to operate this access point in a region other than one of those identified in
this field.
Firmware Version. The version of the firmware currently installed.
Current Time. The current time setting of the access point.
Management
41