Wi-Fi Protected Setup (Wps) - NETGEAR N150 WN604 User Manual

Select the key to be used as the default key by selecting the radio button. (Data
5.
transmissions are always encrypted using the default key.)
Wireless client security separation is disabled by default. If it is enabled, associated wireless
6.
clients cannot communicate with each other. (This feature is intended for hotspots and other
public access situations.
Click Apply to save your settings.
7.

Wi-Fi Protected Setup (WPS)

WPS is a simple method that lets you easily and securely add a client to the wireless network
without typing the WPA2 or WPA password. WPS is compatible with WPA2 and WPA
security. The wireless client has to support WPS for this method to work.

To configure WPS:
Select Configuration > WPS. The WPS Settings screen displays:
1.
Select the Enable radio button to enable WPS on your access point.
2.
Adjust the other settings on the screen as needed.
3.
Router's PIN. This is the PIN that a registrar can use to configure the access point's
•
wireless settings through WPS. This PIN is also on the product label. You can use an
external registrar to configure the access point's SSID and security settings through
WPS, and you will be prompted to enter the PIN that is displayed here.
Note: By using this WPS PIN, an external registrar can set or get the access
point's wireless settings through WPS, and apply the settings to connect itself
to the access point.
Disable Router's PIN. Select this check box if you want to disable the access point's
•
PIN. An external registrar can only configure the access point's wireless settings
through WPS only when the PIN is enabled. by default, this check box is not selected.
Wireless N150 Access Point WN604
Configure Security
30