Set The Time; Set Basic Ip Options - NETGEAR N150 WN604 User Manual

Set the Time


To configure your time settings:
Select Configuration > System > Basic > Time. The Time screen displays:
1.
Configure the following information:
2.
Time Zone. From the drop-down list, select the local time zone for your access point
•
from a list of all available time zones. The default is USA-Pacific.
NTP Client. Enable NTP client to synchronize the time of the access point with an
•
NTP server. The default is Enable.
You need an Internet connection to get the current time.
Note:
Use Custom NTP Server. Select this check box if you have a custom NTP server. By
•
default, this option is disabled.
Hostname / IP Address. Enter the host name or the IP address of the custom NTP
•
server. The default is time-b.netgear.com.
Click Apply.
3.

Set Basic IP Options

The basic IP settings for your access point are entered on this screen. Most of the default
settings work in most cases. However, if your access point is part of a more complex LAN
network, then modify the settings to meet the requirements of your network based on the
explanation of the various fields.
Wireless N150 Access Point WN604
Installation and Basic Configuration
15