Modifying The Preset Temperature; Using The Timer - Smeg SAP112-8 Operation And Installation Instructions Manual

Cooking can be interrupted at any time by holding down the ON/OFF knob for at
least two seconds.

6.8.1 Modifying the preset temperature

The preset temperature for each function can be
changed to suit the user's requirements.
At any time while cooking is in progress, turn the
temperature selection knob right or left to increase or
decrease the cooking temperature by 5 degrees at a
time. (Keep the knob turned to produce a faster
increase or decrease).
6.9

Using the timer

Warning: the timer does not stop the cooking process. It only warns the user that the
preset number of minutes have passed.
The timer can be activated in any of the appliance's
modes. Press the temperature selection knob and
the display will show the
(constantly on) and the
Turn the knob right or left to set the minutes from
00:01 to 04:00.
A few seconds after the required duration is set,
will stop flashing and stay on constantly; the
countdown will start from that moment.
At this point it is possible to select the desired
cooking function and wait for the buzzer to sound,
indicating that the cooking time is over.
Press the temperature selection knob to switch off
the buzzer. Another time can then be selected by
turning the same knob right or left.
22
Instructions for the User
symbol (flashing).
(Temperature knob)
figures
(Temperature knob)
(Temperature knob)
(Temperature knob)