Cisco CVR100W Administration Manual page 82

Configuring Wireless Network
Configuring Advanced Wireless Settings
Cisco CVR100W Wireless-N VPN Router Administration Guide
Basic Rate
Transmission Rate
The Basic Rate setting is not the rate of transmission
but a series of rates at which the Services Ready
Platform can transmit.
The CVR100W advertises its basic rate to the other
wireless devices in your network, so they know which
rates will be used.
The Services Ready Platform will also advertise that it
will automatically select the best rate for transmission.
The default setting is Default, when the CVR100W can
transmit at all standard wireless rates (1-2 Mbps, 5.5
Mbps, 11 Mbps, 18 Mbps, 24 Mbps, and so on). In
addition to B and G speeds, the CVR100W supports
N speeds.
Other options are 1-2 Mbps, for use with older wireless
technology, and All, when the CVR100W can transmit
at all wireless rates.
The Basic Rate is not the actual rate of data
transmission. If you want to specify the CVR100W's
rate of data transmission, configure the Transmission
Rate setting.
The rate of data transmission should be set depending
on the speed of your wireless network.
You can select from a range of transmission speeds, or
you can select Auto to have the CVR100W
automatically use the fastest possible data rate and
enable the Auto-Fallback feature.
Auto-Fallback will negotiate the best possible
connection speed between the CVR100W and a
wireless client. The default is Auto.
4
80