Back Of Original Image Appears In Scanned Image; Scanned Characters Are Blurry; Characters Are Not Recognized During Conversion To Editable Text (Ocr) - Epson DS-510 User Manual

Back of Original Image Appears in Scanned Image

If an image from the back of a thin original appears in your scanned image, make sure you selected the
correct Image Type setting for your original and select the Text Enhancement setting in Epson Scan.
Parent topic:
Related references
Available Image Adjustments
Related tasks
Scanning with Epson Scan

Scanned Characters are Blurry

If characters in a scanned image appear blurry, adjust these Epson Scan settings (if available) and try
scanning again:
• Select the Text Enhancement setting.
• Adjust the Threshold setting.
• Increase the Resolution setting.
Parent topic:
Related references
Available Image Adjustments
Related tasks
Scanning with Epson Scan

Characters are not Recognized During Conversion to Editable Text (OCR)

If characters in your scanned images are not recognized during OCR conversion, try these solutions:
• Make sure your original is straight.
• Adjust these Epson Scan settings (if available) and try scanning again:
• Select Text Enhancement
• Select the correct Image Type setting
• Adjust the Threshold setting
• Check the manual for your OCR software for any additional adjustments.
Parent topic:
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
65