Connecting the Network Interface Unit
See the documentation that came with the optional Epson Network Interface Unit for instructions on
connecting it to your scanner.
Parent topic:
Setting Up Network Scanning
You can setup network scanning to your scanner through the optional Epson Network Interface Unit.
First connect the unit to your scanner and verifying that they are working properly. Then follow the
instructions here to set up computers for network scanning using the Epson Scan Settings utility.
Note: Make a note of the IP address or host name of the Network Interface Unit so you can enter it in
these steps.
1. Do one of the following to start Epson Scan Settings:
• Windows 8: Navigate to the Start screen, right-click the screen, and select All apps. Select
EPSON Scan Settings.
• Windows (other versions): Click
Scan > EPSON Scan Settings.
• Mac OS X: Open the Applications folder, click Epson Software, and click Epson Scan
Settings.
2. Select your scanner from the Select Scanner list.
3. Select the Network setting and click the Add button.
You see this screen:
Using the Network Interface Unit
or Start > All Programs or Programs > EPSON > EPSON
30