Back Of Original Image Appears In Scanned Image; Scanned Characters Are Blurry - Epson B11B236201 User Manual

Spots or Lines Appear in All Scanned Images
Scanned Image is Cropped
Resetting the Epson Scan 2 Settings
Parent topic:

Back of Original Image Appears in Scanned Image

If an image from the back of a thin original appears in your scanned image, make sure you selected the
correct Image Type setting for your original and select the Text Enhancement setting in Epson Scan 2.
Parent topic:
Related references
Image Format Options
Related tasks
Scanning in Epson Scan 2

Scanned Characters are Blurry

If characters in your scanned images are blurry, try these solutions:
• Make sure you do not move the scanner or original while scanning.
• Operate the scanner on a flat, stable surface.
• Make sure the originals are ejecting properly.
• Adjust these Epson Scan 2 settings (if available) and try scanning again:
• Select the Text Enhancement setting.
• Adjust the Threshold setting.
• Increase the Resolution setting.
Parent topic:
Related references
Image Format Options
Related tasks
Scanning in Epson Scan 2
Solving Problems
Solving Scanned Image Quality Problems
Solving Scanned Image Quality Problems
114