Table of Contents
Advertisement
Removing a Handset
1. In the Standby mode, press the Menu soft key.
2. Press the
then press the Select soft key.
3. Enter the PIN code, then press the OK soft key.
4. Press the
appears, then press the Select soft key.
5. The selected base number to which your handset is current-
ly registered appears. Press the Yes soft key.
6. When the handset is properly removed, Fail to Register is
displayed. Now, you cannot use the handset with the base
unit unless you register the handset back to it.
N o t e: If the handset is re g i s t e red to more than one base unit,
and you want to use the handset with other base units,
you have to choose one of the other bases available.
Refer to 'Selecting Base Manually' on page 64.
soft key repeatedly until System appears,
soft key repeatedly until Remove Handset
(Menu 6-3)
System
59
Advertisement
Table of Contents
