Artesian Spas Grand Bahama Manual
  1. Manuals
  2. Brands
  3. Artesian Spas Manuals
  4. Hot Tub
  5. Grand Bahama
  6. Manual

Artesian Spas Grand Bahama Manual

Hide thumbs Also See for Grand Bahama:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
WWW.ARTESIANSPAS.COM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Grand Bahama and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Artesian Spas Grand Bahama

Summary of Contents for Artesian Spas Grand Bahama

  • Page 1 WWW.ARTESIANSPAS.COM...
  • Page 2 Saba Bimini Santa Cruz Copyright 2007 May Mfg. LLC - All rights Reserved. This document may not be copied, photocopied, reproduced, translated or transmitted in any form or for any purposes without the express written consent of the Artesian Spas.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Congratulations............Safety Warnings............Line Drawing Key............. Spa Configuration and Specs....Pump Configurations..........Electrical Requirements and Installation....Electrical Wiring..........Procedure for 120V Wiring....... Spa Start Up.............. Selecting a Location........Inspection............Filling the Spa with Water........ Turning the Power On........Verifying Water Circulation......

  • Page 4: Table Of Contents

    TABLE OF CONTENTS cont... Cleaning Your Spa Interior....... Cover Care............Chemical Treatment of Water......Water Chemistry.............. Water Treatment Glossary........Spa Chemicals Glossary........Maintaining the Proper pH........Warranty Information............. Interior Spa Diagram............

  • Page 5: Congratulations

    Congratulations... Congratulations on the purchase of your new Island spa by Artesian. We know you will enjoy your spa. Although spas are relaxing and fun, we believe they can be an indispensable part of a healthy lifestyle. The spa lifestyle is one that encourages health and well-being.
  • Page 6 For your future reference and convenience, please record the Se- rial and Model number along with the installation date in the spaces provided below. STORE THIS MANUAL WHERE YOU CAN EAS- ILY FIND IT WHEN NEEDED. The serial and model numbers are mounted on the base of the equipment enclosure area, as shown below.

  • Page 7: Safety Warnings

    SAFETY WARNINGS PLEASE TAKE THE TIME TO READ ALL OF THESE WARNINGS AND CAUTIONS PRIOR TO USING YOUR SPA. PLEASE, be a responsible spa owner. When installing and using this spa, always adhere to basic safety precautions. Be sure to list emergency telephone numbers at the telephone nearest the spa, including physician, hospital, ambulance, police, and the fire department.
  • Page 8 SAFETY WARNINGS cont... 8. WARNING - To reduce the risk of injury: a) The water in a spa should never exceed 40 C (104 F). Water tempera- tures between 38 C (100 F) and 40 C are considered safe for a healthy adult.
  • Page 9 6. Do not service this product yourself as opening or removing covers may expose you to dangerous voltage or other risk of injury. Refer all servicing to qualified service personnal. KEEP THESE SAFETY INSTRUCTIONS IN A CONVENIENT AND READ- ILY ACCESSIBLE LOCATION!!

  • Page 10: Topside Control

    LINE DRAWING KEY Name of Component Symbol for Component Whirlpool 5in Helix Roto 4.5” Helix Roto 4” Helix Direct 4” Helix Jet 2.75in Helix Direct 3” Helix Direct 2” Jumbo Storm Massage Helix Massage 3” Helix Direct 5” Filter Speaker Diverter Control Topside Control Line Drawings may not be exact models of your particular spa.Certain options may...

  • Page 11: Spa Configuration And Specs

    Grand Bahama 62-3P 60Hz 50Hz Volume 450 gal 1703 l Weight (dry/filled) 783/4531 lbs 360/2084 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...

  • Page 12: Grand Bahama 52-3P

    Grand Bahama 52-3P 60Hz 50Hz Volume 450 gal 1703 l Weight (dry/filled) 783/4531 lbs 360/2084 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 13 Grand Bahama 52 60Hz 50Hz Volume 450 gal 1703 l Weight (dry/filled) 783/4531 lbs 360/2084 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 14 Grand Bahama 44 60Hz 50Hz Volume 450 gal 1703 l Weight (dry/filled) 783/4531 lbs 360/2084 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 15 Grand Bahama 32- 60Hz 50Hz Volume 450 gal 1703 l Weight (dry/filled) 783/4531 lbs 360/2084 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 16 Grand Bahama 32 60Hz 50Hz Volume 450 gal 1703 l Weight (dry/filled) 783/4531 lbs 360/2084 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 17 Grand Cayman 62-3P 60Hz 50Hz Volume 475 gal 1797 l Weight (dry/filled) 782/4738 lbs 359.7/2179 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 18 Grand Cayman 52-3P 60Hz 50Hz Volume 475 gal 1797 l Weight (dry/filled) 782/4738 lbs 359.7/2179 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 19 Grand Cayman 52 60Hz 50Hz Volume 475 gal 1797 l Weight (dry/filled) 782/4738 lbs 359.7/2179 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 20 Grand Cayman 44 60Hz 50Hz Volume 475 gal 1797 l Weight (dry/filled) 782/4738 lbs 359.7/2179 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 21 Grand Cayman 32-2P 60Hz 50Hz Volume 475 gal 1797 l Weight (dry/filled) 782/4738 lbs 359.7/2179 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 22 Grand Cayman 32 60Hz 50Hz Volume 475 gal 1797 l Weight (dry/filled) 782/4738 lbs 359.7/2179 kg 91x91x36in 2.31x2.31x0.91 m ensions Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 23 Captiva 52-3P 60Hz 50Hz Volume 350 gal 1324 l Weight (dry/filled) 550/ 3465lbs 253/1593 kg Dimensions 82x82x36in 2.08x2.08x0.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 24 Captiva 52-2P 60Hz 50Hz Volume 350 gal 1324 l Weight (dry/filled) 550/ 3465lbs 253/1593 kg Dimensions 82x82x36in 2.08x2.08x0.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 25 Captiva 44 60Hz 50Hz Volume 350 gal 1324 l Weight (dry/filled) 550/ 3465lbs 253/1593 kg Dimensions 82x82x36in 2.08x2.08x0.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 26 Captiva 32-2P 60Hz 50Hz Volume 350 gal 1324 l Weight (dry/filled) 550/ 3465lbs 253/1593 kg Dimensions 82x82x36in 2.08x2.08x0.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 27 Captiva 32-1P 60Hz 50Hz Volume 350 gal 1324 l Weight (dry/filled) 550/ 3465lbs 253/1593 kg Dimensions 82x82x36in 2.08x2.08x0.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 28 Captiva 22 60Hz 50Hz Volume 350 gal 1324 l Weight (dry/filled) 550/ 3465lbs 253/1593 kg Dimensions 82x82x36in 2.08x2.08x0.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 29 Antigua 52-3P 60Hz 50Hz Volume 325 gal 1230 l Weight (dry/filled) 550/3257lbs 253/1498 kg Dimensions 82x82x36in 2.08x2.08x.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 30 Antigua 52 60Hz 50Hz Volume 325 gal 1230 l Weight (dry/filled) 550/3257lbs 253/1498 kg Dimensions 82x82x36in 2.08x2.08x.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 31 Antigua 44 60Hz 50Hz Volume 325 gal 1230 l Weight (dry/filled) 550/3257lbs 253/1498 kg Dimensions 82x82x36in 2.08x2.08x.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 32 Antigua 32-2P 60Hz 50Hz Volume 325 gal 1230 l Weight (dry/filled) 550/3257lbs 253/1498 kg Dimensions 82x82x36in 2.08x2.08x.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 33 Antigua 32-1P 60Hz 50Hz Volume 325 gal 1230 l Weight (dry/filled) 550/3257lbs 253/1498 kg Dimensions 82x82x36in 2.08x2.08x.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 34 Antigua 22 60Hz 50Hz Volume 325 gal 1230 l Weight (dry/filled) 550/3257lbs 253/1498 kg Dimensions 82x82x36in 2.08x2.08x.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 35 Bimini 72 60Hz 50Hz Volume 580 gal 2195 l Weight (dry/filled) 1100/5931 lbs 506/2728 kg Dimensions 91x132x36 in 2.31x3.35x.91 m Control MVS504DZ MGS504SZ Heater 5.5kW Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 36 Saba 46 60Hz 50Hz Volume 250 gal 946 l Weight (dry/filled) 500/2582 lbs 230/1197 kg Dimensions 72x82x35 in 1.83x2.08x.89 m Control MVS504DZ MGS504SZ Heater 5.5kw Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 37 Saba 38 60Hz 50Hz Volume 250 gal 946 l Weight (dry/filled) 500/2582 lbs 230/1197 kg Dimensions 72x82x35 in 1.83x2.08x.89 m Control MVS504DZ MGS504SZ Heater 5.5kw Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 38 Saba 29 60Hz 50Hz VVolume 250 gal 946 l Weight (dry/filled) 500/2582 lbs 230/1197 kg Dimensions 72x82x35 in 1.83x2.08x.89 m Control MVS504DZ MGS504SZ Heater 5.5kw Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 39 Saba 29-2P 60Hz 50Hz Volume 250 gal 946 l Weight (dry/filled) 500/2582 lbs 230/1197 kg Dimensions 72x82x35 in 1.83x2.08x.89 m Control MVS504DZ MGS504SZ Heater 5.5kw Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 40 Santa Cruz 30 60Hz 50Hz Volume 180 gal 681 l Weight (dry/filled) 440/1939 lbs 202/891 kg Dimensions 82x60x32 in 2.08x1.52x.81 m Control MVS504DZ MGS504SZ Heater 5.5kw Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 41 Santa Cruz 30-2P 60Hz 50Hz Volume 180 gal 681 l Weight (dry/filled) 440/1939 lbs 202/891 kg Dimensions 82x60x32 in 2.08x1.52x.81 m Control MVS504DZ MGS504SZ Heater 5.5kw Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 42 Santa Cruz 18 60Hz 50Hz Volume 180 gal 681 l Weight (dry/filled) 440/1939 lbs 202/891 kg Dimensions 82x60x32 in 2.08x1.52x.81 m Control MVS504DZ MGS504SZ Heater 5.5kw Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 43 Santa Cruz 13 60Hz 50Hz Volume 180 gal 681 l Weight (dry/filled) 440/1939 lbs 202/891 kg Dimensions 82x60x32 in 2.08x1.52x.81 m Control MVS504DZ MGS504SZ Heater 5.5kw Flo-Thru 2.0kW Flo-Thru Circulation System optional optional Ozone optional optional Cartridge Filter...
  • Page 44 Pump Configuration for 60Hz Model Type Pump 1 Pump 2 Pump 3 62-3P 3MBHP-1SP 230V 52-3P* 6MBPH-2SP 230V 6MBHP-1SP 230V 52-2P 44-2P 4.8MBHP 230V 4.8MBHP-1SP 230V 32-1P 6MBHP-2SP 230V 32-2P 3MBHP-1SP 230V 3MBHP-3SP 230V 3MBHP-1SP 52-3P* 230V 6MBHP-1SP 230V 52-2P 6MBHP-2SP 230V 44-2P 32-1P...
  • Page 45 Pump Configuration for 50Hz Model Pump 1 Pump 2 Pump 3 Type 62-3P 1.4HP-1SP 230V 52-3P* 2HP-2SP 230V 3HP-1SP 230V 52-2P 44-2P 32-2P 1.4HP-1SP 230V 1.4HP-1SP 230V 32-1 2HP-2SP 230V 52-3P 1.4HP-1SP 230V 52-2P 2HP-2SP 230V 3HP-1SP 230V 44-2P 32-2P 1.4HP-1SP 230V 1.4HP-1SP 230V 32-1P...

  • Page 46: Electrical Requirements And Installation

    This feature gives you the most performance out of your spa. This will require a 240V, 60-amp GFCI. If a 60-amp service is not available, please contact the Artesian Spas’ Customer Service department to configure the amp draw requirements.
  • Page 47 1343...
  • Page 48 50 Hz Electrical Installation Single Service: (1 X 16 Amps or 1 X 32 Amps) This option is configured and shipped as the default. Dual service: (2X 16 Amps) Completely remove the white wire from J32 and J26...
  • Page 49 Picture of System Box Terminal Connection for 60Hz Connect the each color to its respective terminal block location. The Ground (green) wire must be connected to the ground- ing terminal which is outside of the System box. The Ground- ing wire must first enter the system box and then access the grounding terminal via a hole on the side of the box adjacent to the grounding terminal as shown in the picture above.
  • Page 50 PROCEDURE FOR 120VAC CONVERSION Verify that the required equipment attached to the VS Series spa control is rated for 120VAC When using 120VAC service, the effective heater output will be 25% of the 240VAC rating. Example: A 5.5kW @240VAC heater becomes approximately 1.25kW@120VAC 1.
  • Page 51 Power Terminals Diagram for 120VAC setup...

  • Page 52: Selecting A Location

    SPA START-UP Please read each step of the Start-up section prior to doing the step. SELECTING A LOCATION In preparation for installing your new Artesian spa, you should en- sure that your chosen location meets some minimum guidelines: 1) Place your spa on a surface that is large enough for the entire spa to fit.

  • Page 53: Inspection

    7) Have the spa deck installed by a knowledgeable contractor to ensure proper support. 8). If the spa is placed on the ground, even for a short period of time, it must be supported by stones that are at least 2 inches thick and 12 inch- es square.
  • Page 54 SPA START-UP cont... FILLING THE SPA WITH WATER cont... 4) Fill the spa to the bottom of the pillows. Note: DO NOT OVER-FILL YOUR TUB! 5) With the front panel off, verify there are no leaks at the pump union. Note: Pump unions can become loose during shipping.

  • Page 55: Testing The Gfci Breaker

    TESTING THE GFCI BREAKER NOTE: The electrical service panel for your spa should be equipped with a GFCI breaker. To avoid the risk of electrical shock, perform the following safety test before each use of your spa. 1) Make sure the power is turned on at the electrical service panel. 2) Turn on the GFCI breaker.

  • Page 56: Jets

    SPA START-UP cont... Turning on the Spa for the first time. NOTE: When power is turned on, your spa will automatically start out in priming mode for approximately 2 minutes indicated by “Pr” on the topside control. During this time no components are pow- ered.

  • Page 57: Start Up/Setting Time Of Day

    Topside Controller Instructions Initial Start up / Setting the Time of Day Topside control for Island models After the spa has been powered up and the topside controller is finished displaying “Pr”, the user may control the various pumps, lights, temperature of the water, filter cycles, and choose between different modes of operation from this topside controller.

  • Page 58: Light/Mode/Jets

    Light/ Mode/ Jets Light Press the “Light” button to turn the light on and off. If left on, the light automatically turns off after 4 hours. Mode The mode is changed by pressing the up or down arrow then the mode key.

  • Page 59: Preset Filter Cycles

    Topside Controller Instructions cont... Preset Filter Cycles/ Optional Filter Cycles Preset Filter Cycles The first filter cycle is automatically activated at 8:00am and oper- ates the low speed of pump one* (or the circulation pump if spa is equiped) until 10:00am. The second filter cycle is automatically activated at 8:00pm and operated the low speed of pump 1 until 10:00pm.

  • Page 60: Freeze Protection

    Topside Controller Instructions cont... Temp/Set (80°F - 104°F / 26°C - 40°C)/ Freeze Protection Temp/Set (80°F - 104°F / 26°C - 40°C) The start-up temperature is set to 100°F/37°C. The Last measures temperature is constantly displayed on the LCD. NOTE: The last measured spa temperature displayed is current only when the pump has been running for at least 1 minute.
  • Page 61 Diagnostic Messages Temperature unknown. After the pump has been running for 2 minutes, the temperature will be displayed “Overheat” - The spa has shut down. One of the sensors has detected 118°F/48°C at the heater. DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool.
  • Page 62 Diagnostic Messages cont... Sensors are out of balance. If alternating with spa temperature, it may just be a temporary condition. If flashing by itself, spa is shut down. problem persists, contact your dealer service organization. A significant difference between temperature sensors has been detected.

  • Page 63: Maintaining Your Spa

    MAINTAINING YOUR SPA DRAINING YOUR SPA Your spa needs to be drained, cleaned, waxed, and refilled about every six months. More frequent water changes may be necessary if bather load is heavy. A hose bib has been provided below the left side of your front access panel, to assist you in draining your spa.

  • Page 64: Jet Care

    JET CARE We recommended that you clean your jets when you drain your spa. 1) Spray jet inserts with a mixture of 1 part vinegar to two parts warm water and let soak for 10 - 15 minutes. Periodically rotate the spinner nozzle to break up residue in the jets.
  • Page 65 MAINTAINING YOUR SPA cont... REMOVING, INSTALLING AND CLEANING FILTERS These are the steps needed to successfully replace your filters.You should replace your disposable spa filters and clean your nondispos- able filters every four months. 1) Turn off all power to your spa and remove the filter lid by lifting it out towards you.

  • Page 66: Winterizing Your Spa

    WINTERIZING YOUR SPA It is not recommended that you drain your spa completely during freezing conditions. We recommend that you leave your spa full of water with the power on to keep the tub from freezing. If you decide to drain your spa during freezing conditions, contact your dealer for help.

  • Page 67: Spa Cabinet Care

    It is important to clean the interior of your spa every time it is drained to help preserve the sheen of your spa’s surface. However, it is important that you do not use any abrasive cleaners or strong chemicals. Your Artesian Spas authorized dealer will be able to supply...

  • Page 68: Cover Care

    you with the proper cleaning solution for your spa. After cleaning, make sure all residues are removed prior to filling the spa. This will help pre- vent sudsing and improper chemical balance. COVER CARE Cleaning of your spa cover is an important part of routine maintenance.

  • Page 69: Chemical Treatment Of Water

    MAINTAINING YOUR SPA cont... CHEMICAL TREATMENT OF WATER Water from your tap is fine for showers, bathing and drinking. However, in a contained recirculating system such as in a spa, water must be treated with chemicals. The main purpose of chemical treatment is to keep the water sanitary and to maintain a specific balance of the water.

  • Page 70: Water Chemistry

    WATER CHEMISTRY CAUTION: The chemicals used to maintain the pH balance of the water and to sanitize the water can be dangerous. Always follow these basic guidelines when handling the chemicals 1. Always read and follow the directions on the label, unless directed otherwise.
  • Page 71 WATER CHEMISTRY cont... WATER TREATMENT GLOSSARY cont... be rapid sanitizer loss, eye and skin irritation, The effects of low PH can expedited corrosion of metals, as well as staining throughout the spa. High PH can result in cloudy water, low sanitizer efficiency, as well as eye and skin irritation.
  • Page 72 9 - Organic Matter: These are carbon-derived substances typically generated by living organisms. In a spa, they are most frequently intro- duced into the water by bathers. Enzyme products such as Spa Perfect by Natural Chemistry are most effective at eliminating organic matter from your body of water.
  • Page 73 WATER CHEMISTRY cont... WATER TREATMENT GLOSSARY cont... 17 - Chloramines: irritating, odorous forms of combined chlorine, formed by the reaction of chlorine with nitrogen containing waste prod- ucts. Chloramines are ineffective as a pool or spa sanitizer. High lev- els of chloramines can cause the problems of “Red Eyes” or “Stinging Eyes.”...
  • Page 74 of erosion and do not require electrical components. Most include some type of replaceable cartridge, that contains the copper, silver or zinc materials. 24 - Biguanide: the generic name for a non-chlorine, non-bromine, sanitizer that utilizes the polymer PHMB (polyhexamethylene bigu- anide).

  • Page 75: Spa Chemicals Glossary

    WATER CHEMISTRY cont... SPA CHEMICALS GLOSSARY 1 - Alkalinity Up: The total alkalinity of your spa water should be be- tween 80-140 PPM. A proper alkalinity will help buffer your spa water against sudden changes in pH. Every 2.5 tablespoons of Alkalinity Up will raise your alkalinity by 10 PPM in a spa holding 500 gallons of wa- ter.
  • Page 76 7 - pH Up: The effects of low pH can be rapid sanitizer loss, eye and skin irritation, expedited corrosion of metals, as well as staining through- out the spa. pH up can be purchased from your dealer in either liquid or solid granular form.

  • Page 77: Maintaining The Proper Ph

    WATER CHEMISTRY cont... MAINTAINING THE PROPER pH BALANCE The pH factor is a measure of the relative acidity or alkalinity in the water. It is measured on a scale of 1 to 14. Pure water has a value of 7, which is neutral.
  • Page 78 Artesian Spa Island Class Warranty This section is a description of your warranty. Here you will find descrip- tions of what is covered under your Island Class Spa warranty and what can void your warranty. For warranty outside USA and Canada, please refer to your countries Artesian Distributor.
  • Page 79 T RANSFER OF OWNERSHIP. COMMERCIAL APPLICATIONS ARE EXCLUDED FROM THIS AND ALL WARRANTIES . The spa must be set on a level solid surface that is sufficient to support the entire length and width of the spa. Standard building practices must be followed. Dam- age caused by failure to have a leveled and supported foundation under the spa is not covered under warranty.
  • Page 80 WARRANTY cont... APPLICATIONS ARE EXCLUDED FROM THIS AND ALL WARRAN- TIES. The stereo, speakers, L.E.D. lighting, and Ozone are not included in this warranty but are covered under a separate warranty. Damage caused by weather, poor water chemistry, and/or improper maintenance will not be covered under this warranty.
  • Page 81 Stereo and Stereo Components The stereo and stereo components, including speakers, sub woofer, wire harness, and remote control are covered for 30 days from the date of installation, parts and lobor. 1 year parts only. This warranty does not cover damage to a stereo or stereo component from abuse, poor recep- tion, or damage caused by putting a wet CD into the stereo.
  • Page 82 WARRANTY cont... Limitations This warranty is void if this Artesian Spa has been subjected to altera- tion, misuse, or repairs have been performed by anyone other than an authorized agent of May Manufacturing LLC. Misuse or abuse is defined as: use of the spa in a nonresidential application, water temperature outside the range of 32 degrees F to 110 degrees F, damage caused by clogged or dirty filter cartridges, damage to the spa from an absence of a hard cover, damage to components from improper pH, use of any...
  • Page 83 Fuses Light Bulbs of Any Kind Removing a Spa from a Structure Pillows Filters Chemical Misuse Filter Lids Any Part not Purchased from Artesian Spas Jet Inserts Valve Handles Pump Seals Draining and filling the Spa Acts of Nature TravelCharges...

  • Page 84: Interior Spa Diagram

    INTERIOR SPA DIAGRAM...
  • Page 85 1) Spa Pack 2) Heater 3) Therapy Pump...

This manual is also suitable for:

AntiguaGrand caymanSabaBiminiCaptivaSanta cruz

Table of Contents

Save PDF