Linn Powertek Owner's Manual page 5

IMPORTANT CAUTION NOTE When passively bi-amping or tri-amping loudspeakers, be sure to
remove any connecting links that are at the speaker input terminals. Failure to do so will short the
amplifier outputs together and may damage the power amplifiers.
SPEAKER INPUTS
Two sets of speaker outputs are provided on the rear of the POWERTEK. This simplifies the bi-wiring of
speakers such as the INDEX, HELIX, or NEXUS.
Whether you are using single speaker cable, bi-wiring, or tri-wiring, the 4mm plugs supplied should be
properly soldered to good quality cable. For best results we recommend Linn loudspeaker cable,
which is available through your authorised Linn retailer.
Please note that speaker cable is directional and usually provides slightly better performance when
orientated in the proper direction. Linn speaker cable is imprinted with a circular Linn logo followed by
the model number of the cable. When the cable is properly orientated, the circular logo will point
towards the loudspeakers.
5