Preparation - Kenwood TK-2260EX Instruction Manual

INSTALLING/ REMOvING THE BATTERY PACK
1
Note: Before charging a battery pack that is attached to the
transceiver, ensure that the safety catch is firmly closed.
INSTALLING THE (OPTIONAL) ANTENNA
Antenna
2

PREPARATION

1 Match the guides of the battery
pack with the grooves on the
upper rear of the transceiver,
then firmly press the battery
pack in place.
2 Lock the safety catch to
2
prevent accidentally releasing
the battery pack.
3 To remove the battery pack,
lift the safety catch, press the
release latch, then pull the
battery pack away from the
transceiver.
3
Screw the antenna into the connector
on the top of the transceiver by
holding the antenna at its base and
turning it clockwise until secure.