Setting up a Remote Connection to the RAID Controller
To install the Intel
the J2 Remote BBU connector, do the following:.
1. Ground yourself, and remove the Intel
package.
2. Install the plastic standoff to the REB.
Figure 5. Installing the Plastic Standoff on the REB
3. Install the Remote Extension Board (REB) onto the RAID controller's battery
connector (JT3 on the RS2BL080).
®
Intel
RAID Smart Battery AXXRSBBU8 User's Guide
®
RAID Smart Battery AXXRSBBU8 on the RAID Controller through
®
RAID Smart Battery AXXRSBBU8 from the
A
AF003238
9