Figure 8. Aligning Holder's Tabs To The Chassis Clips - Intel AXXRSBBU8 User Manual

If you are installing this component into a third-party chassis, you must first install an
attachment mechanism, such as industrial-grade Velcro*. Refer to your server chassis
documentation or discuss an appropriate attachment mechanism with your server chassis
manufacturer to ensure the attachment mechanism complies with the chassis
requirements.
®
Intel Server Chassis SC5400, Intel
®
Intel Server Systems SR1600UR, SR1625UR, SR2600UR, and SR2625UR
1. Locate the installation clips inside the chassis. They are on the left side of the chassis,
near the rear. Remove the mylar pad if there is a mylar pad covering the mounting
hole.
2. Align the tabs on the plastic battery holder with the clips on the chassis

Figure 8. Aligning Holder's Tabs to the Chassis Clips

3. Slide the plastic battery holder toward the front of the system until the tabs engage
with the clips in the chassis
12
®
Server Chassis SC5600, Intel
(Figure 9).
®
Intel RAID Smart Battery AXXRSBBU8 User's Guide
®
Server Chassis SC5650,
(Figure
AF003676
8).