Installing the AXXRSBBU6
Figure 1 displays the top and bottom views of the AXXRSBBU6. The battery pack is mounted on a
daughtercard which mounts to the RAID controller. Take note of the location of the J2 connector
(5) which plugs into the Intel
top side of the daughtercard will be visible after installation onto the RAID controller.
1.
J4 battery pack harness connector
2.
J5 board-to-board connector
3.
J2 connector
4.
Battery pack harness
5.
Screws
6.
Spacers (stand-offs)
®
RAID Controller and the 3 standoffs (2) and 6 screws (3). Only the
Figure 1. Top and Bottom View of the AXXRSBBU6
3