.
Figure 4. Mounting the Battery on a RAID Controller
7. Attach the Intel
the three Phillips* (2-56) screws provided. Place the three screws from the RAID
controller side.
Caution: Center the screwdriver carefully to avoid stripping the screw head. Do not over-tighten
the screws. The maximum recommended torque is 2.25-inches per pound.
8
Standoff 7/32''
Screw
®
RAID Smart Battery AXXRSBBU8 to the RAID controller using
Battery Pack
RAID Controller
Header
Connect
®
Intel
RAID Smart Battery AXXRSBBU8 User's Guide
AF003674