Saving Images To Pc - Ricoh GR Instruction Manual

Saving Images to PC

Use the supplied USB cable to connect the camera to a computer.
1
Turn off the camera.
2
Open the terminal cover, and connect
one end of the USB cable to the USB/
AV OUT terminal on the camera and
the other end to the computer.
The camera turns on and "Connecting to
PC..... " appears on the monitor for 10 sec.
The camera is recognized by the computer as
a removable disk.
The file of the memory card is displayed when the memory card is set.
When the card is not set, the file of the internal memory is displayed.
3
Copy and save images to PC.
4
Disconnect the USB cable from the computer when saving is
complete.
5
Disconnect the USB cable from the camera.
The camera will turn off automatically.
Note -----------------------------------------------------------------------------------------------------------
• The battery is charged when the camera is connected to the computer.
• If the battery level is low, it may take some time until the camera is recognized by the computer.
Caution -------------------------------------------------------------------------------------------------------
• Do not disconnect the USB cable during image transfer.
5
123