Registering Functions To The Adj. Lever - Ricoh GR Instruction Manual

Note -----------------------------------------------------------------------------------------------------------
• If the settings of [MY1], [MY2], and [MY3] are assigned in [Recall My Settings] and the settings of My
Settings BOX are edited, the changes are also applied to the settings of [MY1], [MY2], and [MY3].
If the settings of [MY1], [MY2], and [MY3] are directly edited, the changes are not applied to the set-
tings of My Settings BOX. Furthermore, if the settings of My Settings BOX are subsequently edited, the
changes are not applied to the settings of [MY1], [MY2], and [MY3].
• The name of the My Settings item is displayed when the
mode dial is turned to MY1/MY2/MY3.
• You can delete My Settings registrations with [Delete My
Settings] of the [Key Custom Options] menu.

Registering Functions to the ADJ. Lever

You can register shooting functions to the ADJ. lever so that you can easily
recall them by ADJ. lever operation (ADJ. mode).
The following functions can be registered.
Off
ISO
Picture Size
Aspect Ratio
Focus
Image
Expo. Metering
Cont. Mode
Auto Bracket
Flash Comp.
Flash Amount
Dyn Range Comp
SnapFocusDist.
Effect
Function
* [Default setting for ADJ. Lever Setting 1]
* [Default setting for ADJ. Lever Setting 2]
* [Default setting for ADJ. Lever Setting 3]
* [Default setting for ADJ. Lever Setting 4]
* [Default setting for ADJ. Lever Setting 5]
Page
—
P. 46
P. 50
P. 50
P. 51
P. 73
P. 49
P. 62
P. 63
P. 70
P. 71
P. 48
P. 52
P. 72
3
105