Lincoln MKZ Hybrid Owner's Manual page 213

Switching the System On
Press and release ON.
The information display will
show the grey indicator light.
E144529
E82311
The current gap setting and SET will
also display.
Setting a Speed
1. Accelerate to the desired speed.
2. Press and release SET+. The
vehicle speed will be stored in the
memory.
3. The information display will show
a green indicator light, current gap
setting and desired set speed.
4. Take your foot off the accelerator
pedal.
E82312
5. A lead vehicle graphic will
illuminate if there is a vehicle
detected in front of you.
Cruise Control
Note: When adaptive cruise control is
active, the set speed displayed in the
information display may vary slightly
from the speedometer.
Following a Vehicle
decelerate automatically to a stop,
nor will the vehicle always decelerate
quickly enough to avoid a collision
without driver intervention. Always
apply the brakes when necessary.
Failing to do so may result in a
collision, serious injury or death.
the radar sensor. In some cases there
may be no warning or the warning
may be delayed. The driver should
always apply the brakes when
necessary. Failing to do so may result
in a collision, serious injury or death.
Note: The brakes may emit a sound
when they are being modulated by the
adaptive cruise control system.
When a vehicle ahead of you enters
the same lane or a slower vehicle is
ahead in the same lane, the vehicle
speed will adjust automatically to
maintain a preset gap distance. The
distance setting is adjustable.
The lead vehicle graphic will be
illuminated.
210
WARNINGS
When following a vehicle in front
of you, the vehicle will not
Adaptive cruise control only
warns of vehicles detected by