Table of Contents
Advertisement
IP address, Subnet mask, Gateway and Time zone parameters are set on this dialogue window.
Reboot the ASIU/ASGW after the setting.
5.2 Modification of serial port setting
In the case of using the Modbus RTU as external interface of ASIU/ASGW this operation is required.
ASIU has one and ASGW has two communication ports and all initial setting data are as follows.
Baudrate
DataBitLength
StopBitLength
Parity
After ASIU/ASGW mode changes to maintenance mode, the communication port is set with the maintenance
windows on web browser.
Refer to the guide of STARDOM FCN/FCJ (IM34P02Q01-01E) about the method of modification.
Setting parameters are "COM1 Port Setting File" or "COM2 Port Setting File".
IM 12Y04D01-01
=9600
=8
=1
=NONE
5.Additiona Information
5-2
Advertisement
Table of Contents
