Additional Information; Modification Of Ip Address Setting - YOKOGAWA ASGW User Manual

5 Additional Information

This chapter explains how to change the IP address of ASIU/ASGW and the property of serial port.
The tool software that is shown below is installed on PC.
CD-ROM Code
NT203AJ-PC11E
5.1 Modification of IP addressing setting
(1) Preparation of PC
Connect the PC on which resource configurator software is installed to ASIU/ASGW with Ethernet
(2) Starting the ASIU/ASGW on the IP address setting mode.
There are two methods of starting the ASIU/ASGW on the IP address setting mode.
One is use of web browser on PC, the other is use of switches on CPU module.
Select one depending on the location of ASIU/ASGW.
During the IP address setting mode, LEDs on CPU module of ASIU/ASGW are indicated as follows.
HRDY: Flashing quickly
RDY: Flashing slowly
CTRL: Not lit
To release this mode, press the RESET button or turn off the power.
A) Method of use the switch on CPU module of ASIU/ASGW
i) Turn on ASIU/ASGW, or press "RESET" button.
ii) ASIU/ASGW starts and during the "HRDY"and "RDY"LED are flashing rapidly (about for two seconds),
press "SHUTDOWN" button once.
iii) ASIU/ASGW starts on IP address setting mode.
B) Method of use web browser on PC.
i) Access to the URL.
URL= http://current
User Accout = "stardom"
IM 12Y04D01-01
Item
Resource configurator
IP address/MNT
5.Additiona Information
5-2