Table of Contents
Advertisement
4. Engineering
ASGW requires the engineering at installation, modification and address mapping.
4.1. Installation
This section explains the setup of ASGW, license registration, IEC application loading and initializing of IP
address.
4.1.1.
Preparation
Installation of the engineering tool
Install the resource configurator software including CD-ROM (NT203AJ-PC11E) to PC.
Resource configurater software is an engineering tool for STARDOM FCN/FCJ.
Installation of the ASGW software
Set the ASGW application software CD on PC.
Uncompress the following compressed file on PC.
(CDR)/ASGW/INSTALL_ASGW.ZIP
Confirm the following folder is created.
([Uncompressed folder]/INSTALL_ASGW
4.1.2.
Initial setting
Loading the license file
Download the ASGW license file from the STARDOM license publishing web site.
Setting the system card
Set the system compact flash card combined with FCJ on PC.
Click the following batch file.
([Uncompressed folder]/INSTALL_ASGW/install_ASGW.bat
This batch file sets the IEC application, Java application and system setting file on the system card.
System setting file includes initial IP address setting.
The initial IP address can be changed later.
After writing, the system card set on the CPU card of ASGW, and turn on the ASGW.
Initial IP address = 192.168.1.151
NOTE:
Do not format the system compact flash card. The card becomes invalid and new one is required.
Initializing with resource configurator
The mothod of initial setting operation with resource configurator is described on the instruction manual.
The work flow is described in this chapter. However, refer to the instruction manual for details of each
operation.
1) Setting the IP address
Refer to 5.1 Modification of IP address.
IM 12Y04D01-01
4. Engineering
5-2
Advertisement
Table of Contents
