HP ProLiant DL360p Specification page 57

QuickSpecs
Additional Options
HP USB and SD Options
Caution: HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools and
number of people to use for any installation.
HP 1U Cable Management Arm for Easy Install Rail Kit
NOTE: Supports Easy Install rail kits only
HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For SFF models.
NOTE: HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit ships standard with some
BTO Preconfigured Channel Models.
HP 1U Cable Management Arm for Ball Bearing Gen8 Rail Kit
NOTE: The HP 1U Gen8 Cable Management Arm is optional for the SFF and LFF Ball
Bearing Rail Kits and is not available for use with the Friction Rail Kit.
HP 1U Large Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For LFF models.
HP Flash Media Kits for USB Drives
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the
VMware virtualization environment and other HP value-add software. HP recommends
this industry standard USB flash device for use with VMware ESXi. USB device must be
installed in the internal slot of the ProLiant server for use with VMware ESXi. Refer to
HP VMware Getting Started Guide for installation instructions.
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB SD Enterprise Mainstream Flash Media Kit
HP 32GB SD Enterprise Mainstream Flash Media Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13971_div/13971_div.html
DA - 14211 Worldwide — Version 47 — December 13, 2013
HP ProLiant DL360p Generation 8 (Gen8)
734811-B21
663201-B21
663203-B21
663202-B21
608447-B21
737953-B21
726113-B21
700136-B21
Page 57