HP ProLiant DL360p Specification page 23

QuickSpecs
Pre-configured Models
E5-2600 series Processors
NOTE: These Models are Energy Star Certified.
Six-Core Model
HP ProLiant DL360p Gen8
E5-2630 2P 16GB-R P420i
SFF 460W PS Energy Star
Server
677199-xx1
HP ProLiant DL360p Gen8
E5-2603 2P 8GB-R P420i
SFF 460W PS Energy Star
Server
677198-xx1
Form Factor
Warranty
Processor(s)
One of the following
depending on Model
Cache Memory
One of the following
depending on Model
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
Management
Energy Star
Form Factor
DA - 14211 Worldwide — Version 47 — December 13, 2013
HP ProLiant DL360p Generation 8 (Gen8)
Rack (1U)
NOTE: Includes the Easy Install Rail kit which does allow for in-rack
serviceability. The Easy Install Cable Management Arm is optional.
Caution: HP recommends that a minimum of two people are required for all
Rack Server installations. Please refer to your installation instructions for
proper tools and number of people to use for any installation.
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support
with next business day response
(2) Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-
1333, HT, Turbo2- 3/3/4/4/5/5) Processors
(2) Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W) Processors
NOTE: All added memory only runs at 1066MHz speed.
15MB (1x15MB) Level 3
10MB (1x10MB) Level 3
16GB (4 x 4GB DDR3-1333MHz LVRDIMMs) (on E5-2630 Model)
8GB (2 x 4GB DDR3-1333MHz LVRDIMMs) (on E5-2603 Model)
NOTE: 24 (12 DIMM slots per processor /4 channels per processor/3 DIMMs
per channel).
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Smart Array P420i/1GB FBWC (RAID 0/1/1+0/5/5+0/6/6+0) (on E5-2630
Model)
HP Smart Array P420i/ZM (RAID 0/1/1+0) (on E5-2603 Model)
None ship standard; includes 7 SFF hard drive blanks
Standard: 8 SFF HDD Bays
1 (Optional: DVD-ROM, DVD-RW)
2 standard(1-FH/HL, 1-LP) PCIe 3.0
(1) HP 460W CS Platinum Plus Hot Plug Power Supply (94% Efficient)
8 Hot Plug Redundant Fan Modules
HP iLO Management Engine (standard)
Optional: HP Insight Control
Meets Energy Star requirements
Rack (1U)
NOTE: Includes Rack Mounting Gen8 telescoping SFF Ball Bearing Rail Kit
which does allow for in rack serviceability. Due to the size and weight of the
server two people are required to install the server into the rack. The HP 1U
Gen8 Cable Management Arm is optional. To assist in the installation of the
server into the rack an optional installation tool is available by contacting your
local services representative (p/n 695539-001).
Caution: HP recommends that a minimum of two people are required for all
Rack Server installations. Please refer to your installation instructions for
proper tools and number of people to use for any installation.
Page 23