HP ProLiant DL360p Specification page 20

QuickSpecs
Pre-configured Models
E5-2600 series Processors
HP ProLiant DL360p Gen8
E5-2640 1P 16GB-R P420i
SFF 460W PS Base Server
646902-xx1
HP ProLiant DL360p Gen8
E5-2630 1P 16GB-R P420i
SFF 460W PS Base Server
646901-xx1
Performance Models
Management
Form Factor
Warranty
Processor(s)
One of the following
depending on Model
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
Management
Form Factor
Warranty
DA - 14211 Worldwide — Version 47 — December 13, 2013
HP ProLiant DL360p Generation 8 (Gen8)
HP iLO Management Engine (standard)
Optional: HP iLO Advanced or HP Insight Control
Rack (1U)
NOTE: Includes the Easy Install Rail kit which does allow for in-rack
serviceability. The Easy Install Cable Management Arm is optional.
Caution: HP recommends that a minimum of two people are required for all
Rack Server installations. Please refer to your installation instructions for
proper tools and number of people to use for any installation.
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support
with next business day response
(1) Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-
1333, HT, Turbo2- 3/3/4/4/5/5) Processor
(1) Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-
1333, HT, Turbo2- 3/3/4/4/5/5) Processor
15MB (1x15MB) L3
16GB (4 x 4GB DDR3-1333MHz RDIMMs)
NOTE: 24 (12 DIMM slots per processor /4 channels per processor/3 DIMMs
per channel).
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Smart Array P420i/1GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
None ship standard; includes 7 SFF hard drive blanks
Standard: 8 SFF HDD Bays
1 (Optional: DVD-ROM, DVD-RW)
2 standard (1-FH/HL, 1-LP) PCIe 3.0
(1) HP 460W CS Platinum Plus Hot Plug Power Supply (94% Efficient)
6 Hot Plug Redundant Fan Modules
HP iLO Management Engine (standard)
Optional: HP iLO Advanced or HP Insight Control
Rack (1U)
NOTE: Includes Rack Mounting Gen8 telescoping SFF Ball Bearing Rail Kit
which does allow for in rack serviceability. Due to the size and weight of the
server two people are required to install the server into the rack. The HP 1U
Gen8 Cable Management Arm is optional. To assist in the installation of the
server into the rack an optional installation tool is available by contacting your
local services representative (p/n 695539-001).
Caution: HP recommends that a minimum of two people are required for all
Rack Server installations. Please refer to your installation instructions for
proper tools and number of people to use for any installation.
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support
with next business day response
Page 20