Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
System Menu
TV/Video Mode
NOTES: When operating the TV at first time, its TV system is at "default factory mode" and this mode cannot display the image
normally on the screen. In order to watch the TV program without problem, please execute "TV Channel Setup" menu for
normally display..
Selected characters
Signal Format
(off the function)
Advance
Press ENTER button to select the following functions
3D Comb
Panel Lock
Off
Mode
Move Screen
Time
Reset
(off the function)
PIP Set
Press ENTER button to select the following functions
Off
Source
Small
Size
9 positions for selection:
Upper Left, Upper Center, Upper Right,
Position
Middle Left, Middle Center, Middle Right,
Lower Left, Lower Center, Lower Right
Audio Source
Black is subdued for
Brightness
increased overall
darkness.
Narrows the gap
PIP Display
Contrast
between brightness
and darkness.
Decrease color
Color
intensity.
Swap
(off the function)
TV Channel Setup
Press ENTER button to select the following functions (only available under TV mode)
Channel Auto
Mode
Search
Search
(off the function)
-
On
Off
On
Off
Mode 1
Mode 2
0~255 sec
-
AV
SV
TV
DTT
Medium
Large
Main
PIP
Black is set off for
increased overall
brightness.
Broadens the gap
between brightness
and darkness.
Increase color
intensity.
-
Position
Direct
-
Setup hint
Press the ENTER button to show the information of the current input signal.
Improve the picture quality for TV, Composite-video.
This is for locking out the control panel function.
Adjust to prevent children from touching.
Adjust to preference.
The moves the picture around the screen to reduce the panel image retention.
This is where stationary objects, such as screen logos, leave a slight image
visible after they should have disappeared.
Adjust to preference.
This moves the picture around the screen in small amounts, at set intervals, to
reduce the panel image retention. This is where stationary objects, such as
screen logos, leave a slight image visible after they should have disappeared
The original factory settings for the items of this Menu page can be restored by
pressing the ENTER button.
Adjust to preference.
Adjust to preference.
Adjust to preference.
Adjust to preference.
Adjust to preference.
Adjust for maximum visibility to suit the ambient brightness.
Adjust to preference.
Press the ENTER button to change main and PIP display.
Select the channel entry method between position setting or direct setting. And
press the ENTER button in SEARCH function to fix it. Please use auto search
when you first use your TV.
• [Position] search the channel by frequency from 48.25~863.25MHz. We
suggest to use these function for the channel setting
• [Direct] search the channel by CCIR PAL B/G table. Provide the faster
speed than position mode, but some channels which are not in the table
may be lost.
Press the ENTER button and it starts the auto tuning.
33
Advertisement
Table of Contents
