OPERATING INSTRUCTIONS (continued)
Input Signal Screen Display
The input signal status can be displayed on the screen by pressing the RECALL button of the remote control.
• The display will go out in approximately 3 seconds.
TV
VIDEO/PC RGB
1024X768 60Hz
CATV
Composite VIDEO
• Activate PIP by pressing PIP Input button to select desired video input.
• Press
on the remote control to select audio source of video input.
• Picture Mode, Brightness, Contrast, Color, Tint, and Sharpness can be
adjusted by Audio source to settle on.
28
TV position
1
Sound mode
I
Analog RGB
Signal mode
Input frequency
Main video input
Audio source
Sub video input
RECALL button