GE GSD4210 Owner's Manual page 20

Table of Contents

Advertisement

Before you call for service...
Troubleshooting Tips
Problem
Stained tub interior
Dishes don't dry
Dishes and flatware
not clean
20
Possible Causes
Detergent with
colorant was used
Low inlet water
temperature
Rinse agent dispenser
is empty
Inlet water temperature
is below 120°F.
Water pressure is
temporarily low
Air gap is clogged
Improper rack loading
What To Do
Some detergents contain
colorant (pigment or dyes)
that will discolor the tub
interior with extended use.
Check the detergent cup
for signs of any
discoloration. If cup is
discolored, change to
detergent without any
colorant.
Make sure inlet water
temperature is correct.
Check the rinse agent
dispenser.
Make sure the Status, Cycle
and Option lights are off,
indicating the dry cycle
(if selected) is complete.
Raise the water heater
temperature to 120°F.
Try TEMP BOOST option.
Turn on a faucet. Is water
coming out more slowly
than usual? If so, wait until
pressure is normal before
using your dishwasher.
Clean the air gap.
Make sure large dishware
does not block the
detergent dispenser or the
wash arm.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsd4220Gsd4230

Table of Contents