Useful Tips - Philips 32PFL5708/F7 User Manual

7 Useful tips

FAQ
Question Answer
My remote control does not
• Check the antenna or cable connection to the main unit.
• Check the batteries of the remote control.
work.
• Check if there is an obstacle between the infrared sensor window and the remote control.
What should I do?
• Test the signal Output use IR Signal Check.
• Aim the remote control directly at the infrared sensor window on the front of the unit.
• Reduce the distance to the unit.
• Re-insert the batteries with their polarities (+/–) as indicated.
• When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal of this
How come the initial setup • Make sure to complete the initial setup before the unit goes into Standby mode.
appears every time I Turn
On this unit?
Why can I not watch some
• Autoprogram must be completed when you set up the unit for the first time or move it to a location where
RF signal TV programs.
• Make sure Autoprogram has been completed.
• The selected channel may not be broadcasting.
• When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete
• The selected channel cannot be viewed by the Child lock setting.
• The unit requires some kind of antenna Input. An indoor antenna (Digital or VHF / UHF), an external antenna (Digital
How come there is no image • Check if the correct Input mode is selected by pressing
from the connected external
devices? • Check the antenna, cable or other Input connection to the unit.
• When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors
When I enter a channel
• Many Digital channels have alternate channel numbers.The unit changes the numbers automatically to the ones
number, it changes
automatically.
Why are captions not
• Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning
displayed entirely? Or,
captions are delayed behind
the dialog.
How can I set the clock ? • There is no clock function on this unit.
I cannot change the Child
• Although the default PIN code (0000) is supplied with the unit, the PIN code will be required once you set a PIN
lock setting because my PIN
code no longer works.
unit. Movethe infrared-equipped device away from this unit, change the angle of the infrared sensor or Turn Off the
infrared communication function.
previously unavailable channels are broadcast.
the Autoprogram. p. 21
or VHF / UHF) or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the unit.
p. 16
are connected to their corresponding colored jacks on the unit.
signifying the broadcasting station channel number.These basic numbers used for previous Analog broadcasts. (e.g.,
Input ch# 30 automatically changes to ch# 6.1)
production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate,
selective editing is used to insure that the captions remain up-to date with the current TV screen dialog.
code in Child lock. p. 23 When you forget your PIN code, enter 9999 in Change PIN to reset the PIN code.
p. 25
p. 36 If okay, then possible infrared sensor trouble.
p. 21
p. 23
SOURCE. Watching channels from an external device
33
English