Usb Memory Stick - Philips 32PFL5708/F7 User Manual

VGA connection
This unit is equipped with a PC Input jack. If you connect this unit to
your PC, you can use this unit as a PC monitor.
Use a VGA cable for this Video connection and it requires a Stereo mini
3.5mm plug Audio cable for Analog Audio signal as well.
For 32PFL5708/F7 and 39PFL5708/F7
IN
For 40PFL5708/F7, 47PFL5708/F7 and 50PFL5708/F7
IN
Stereo mini 3.5 mm plug Audio cable
IN
-The following video signals can be displayed:
Resolution
640 x 480
720 x 480
800 x 600
1024 x 768
1280 x 768
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
Other formats or non-standard signals will not be displayed correctly.
Note
• Please purchase the VGA cable or HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
– Attach a ferrite core to the AC power cord of your PC.
– Unplug the AC power cord and use the built-in battery of your PC.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI
cable is recommended for the better compatibility.
• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
• HDMI-DVI connection requires separate Audio connections as well and the Audio
signals are output as Analog (L/R) Audio.
• DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
PC
Stereo mini 3.5 mm plug Audio cable
IN OUT
OUT
VGA cable
PC
OUT
OUT
VGA cable
Refresh rate
60Hz

USB Memory Stick

This unit offers easy playback of picture, music and movie files.
Insert the USB Memory Stick into the USB terminal shown below.
USB p. 27
Note
• The unit recognizes only a USB Memory Stick.
• Do not use a USB hub or an extension cable to connect an external hard disk drive to
the unit. (Not supported.)
• A USB Memory Stick is always inserted to this unit directly.
• A USB Memory Stick is not supplied with this unit.
• We do not guarantee that all USB Memory Sticks can be supported by this unit.
• Be sure to keep a backup copy of the original files on your device before you play them
back on this unit. We have no responsibilities for damage or loss of your stored data.
• To protect your USB Memory Stick files from being erased place the write protect slid-
ing tab in the protect position.
• When you are ready to remove a USB Memory Stick, set the unit to go into Standby
mode to avoid any damage to your data and the unit.
• A USB Memory Stick that requires its own driver or the device with a special system
such as fingerprint recognition are not supported.
• This unit is not allowed to use the USB Memory Stick which requires an external power
supply (500mA or more).
32
English