Time Settings - D-Link DIR-655 User Manual

Section 3 - Configuration
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can
set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed.
Time Zone: Select the Time Zone from the drop-down menu.
Daylight To select Daylight Saving time manually, select
Saving:
enabled or disabled, and enter a start date and an
end date for daylight saving time.
Enable NTP NTP is short for Network Time Protocol. NTP
Server: synchronizes computer clock times in a network
of computers. Check this box to use a NTP server.
This will only connect to a server on the Internet,
not a local server.
NTP Server Enter the NTP server or select one from the drop-
Used: down menu.
Manual: To manually input the time, enter the values in
these fields for the Year, Month, Day, Hour, Minute,
and Second and then click Set Time. You can also
click Copy Your Computer's Time Settings.
D-Link DIR-655 User Manual

Time Settings

77