Panasonic TH-65PB1U Network Operation Manual page 13

Network Setup
4
Press to go to the next item.
In addition, further perform the following setting depending on [AUTHENTICATION] and [ENCRYPTION]
settings.
DEFAULT KEY
KEY 1
KEY 2
KEY 3
KEY 4
When setting [OPEN] or [SHARED] as authentication and setting [WEP] as the
encryption method:
DEFAULT KEY
KEY1 – 4
When using [WPA-PSK] or [WPA2-PSK] :
When the authentication method is [WPA-EAP/WPA2-EAP], [WPA-EAP], [WPA2-EAP]:
Set [EAP], [USER NAME], and [PASSWORD].
EAP:
USER NAME: Input a user name used for authentication (excluding spaces)(maximum 64 characters).
PASSWORD: Input a password used for authentication (maximum 64 characters).
¼
: When [EAP-TLS] is selected as EAP, it is required to setup "USER NAME", "PASSWORD", "DIGITAL
CERTIFICATE", and "CA CERTIFICATE" with the WEB browser. (See page 24 – 25)
•
If you are unable to connect to the wireless LAN through the access point, contact the manufacturer of
the access point.
•
When using EAP, the display needs to be set according to the setting of the RADIUS server. Check with
the network administrator for the setting of the RADIUS server.
•
When using an EAP together with an access point with invalid SSID broadcast, select WAP-EAP or
WAP2-EAP for the authentication method even if the authentication method of the access point is WPA-
EAP/WPA2-EAP.
5
Select [SAVE] and press
Save the current network settings.
Default wireless LAN settings
The following settings are set before the Display leaves the factory.
SSID
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
1
********
********
********
********
: Set 1 – 4 numerals for the default key.
: Set a WEP key to the key number selected with [DEFAULT KEY].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input ¿ ve
alphanumerics (or a 10-digit string for the hexadecimal format) for the 128-bit key, input
13 alphanumerics (or a 26-digit string for the hexadecimal format).
Set a key.
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
Select the EAP setup in the RADIUS server. Types of EAP that can be selected are as
follows.
PEAP (MS-CHAPv2), PEAP (GTC), EAP-TTLS (MD5),
EAP-TTLS (MS-CHAPv2), EAP-FAST(MS-CHAPv2), EAP-FAST(GTC), EAP-TLS
button.
Panasonic Display
OFF
192.168.11.100
255.255.255.0
192.168.11.1
MODE
AUTHENTICATION
ENCRYPTION
CHANNEL
¼
AD HOC
OPEN
NONE
11
13