Note:
If you are using the JNDR3000 base station with a non-NETGEAR
router as the repeater, you might need to change more configuration
settings. In particular, you should disable the DHCP server function
on the wireless repeater AP.
To configure the router as a repeater unit:
1.
Log in to the router that will be the repeater.
2.
Select BASIC > Wireless Settings and verify that the wireless settings match the base unit
exactly.
The wireless security option has to be set to WEP or None.
3.
Select ADVANCED > Wireless Repeating Function.
The Wireless Repeating Function screen displays.
4.
Select the Enable Wireless Repeating Function check box for the frequency you want.
5.
Select the Wireless Repeater radio button.
6.
Fill in the Repeater IP Address field.
This IP address has to be in the same subnet as the base station, but different from the
LAN IP address of the base station.
7.
(Optional) Select the Disable Wireless Client Association check box to prevent wireless
clients from associating with the repeater and allowing LAN client associations only.
N600 Wireless Dual Band Router JNDR3000
Advanced Settings
98