Table of Contents
Advertisement
•
Wireless network key or password. Your router is preset with a unique wireless
network name (SSID) and password for wireless access. This information is on the label
at the bottom of your router.
NETGEAR genie Setup
NETGEAR genie runs on any device with a web browser. It is the easiest way to set up the
router because it automates many of the steps and verifies that those steps have been
successfully completed. It takes about 15 minutes to complete.
To use NETGEAR genie to set up your router:
1.
Turn on the router by pressing the On/Off button.
2.
Make sure that your device is connected with an Ethernet cable to your router.
3.
Launch your Internet browser.
•
The first time you set up the Internet connection for your router, the browser
automatically goes to http://www.routerlogin.net, and the NETGEAR genie screen
displays.
•
If you already used the NETGEAR genie, type http://www.routerlogin.net in the
address field for your browser to display the NETGEAR genie screen. See
NETGEAR genie after Installation
4.
Follow the instructions on the screen to complete the NETGEAR genie setup. NETGEAR
genie guides you through connecting the router to the Internet.
If the browser cannot display the web page:
•
Make sure that the computer is connected to one of the four LAN Ethernet ports, or
wirelessly to the router.
•
Make sure that the router is up and running. Its Wireless LEDs should light.
N600 Wireless Dual Band Router JNDR3000
on page 19.
Getting Started with NETGEAR genie
18
Use
Advertisement
Table of Contents
