Set Up A Guest Network - NETGEAR N600 JNDR3000 User Manual

You can click the Refresh button to update this screen.
For more information about USB storage, see

Set Up a Guest Network

Adding a guest network allows visitors at your home to use the Internet without using your
wireless security key. You can add a guest network to each wireless network: 2.4 GHz b/g/n
and 5.0 GHz a/n.
To set up a guest network:

1. Select BASIC > Guest Network to display the following screen:
2. Select any of the following wireless settings:
Note: These settings apply separately to the 2.4 GHz b/g/n and 5 GHz a/n
bands.
• Enable Guest Network. When this check box is selected, the guest network is
enabled, and guests can connect to your network using the SSID of this profile.
• Enable Wireless Isolation. If this check box is selected, wireless clients (computers
or wireless devices) that join the network can use the Internet, but cannot access
each other or access Ethernet devices on the network.
• Enable SSID Broadcast. If this check box is selected, the wireless access point
broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt
the correct SSID for connections to this access point.
N600 Wireless Dual Band Router JNDR3000
Chapter 5, USB
NETGEAR genie Basic Settings
39
Storage.
Scroll to
view more
settings