Leaving A Memo; Emote Ccess; Using The Handset - GE 55909320 User Manual

2. Press the delete/erase button on base again. ALL PLAYED MSG ERASED
shows in the display.
• To erase a message from the handset:
1. Press the format/answerer button on the handset.
2. Press the play/stop button on the handset (the 2 key).
3. Press erase on the handset (the 0 key) to erase the message that is playing.
NOTE: Erased messages cannot be restored. Also, be careful not to press the
erase button as the next unheard message is playing because that message will
also be erased.
L M
EAVING A EMO
Use the memo feature to leave a message.
1. Press and hold the memo button.
2. Begin speaking after you hear the beep.
3. Release the memo button when you are finished recording the memo.
R A
EMOTE CCESS
This section explains two types of remote access: using the handset to
access the answering system and accessing the answering system from
another location.
You may access the answering system on the base with the handset buttons.
You may also access your answering system from any touch-tone phone
by entering a 3-digit security code after you hear the outgoing
announcement. A voice menu system guides you through the steps.
U H
SING THE ANDSET
Press the format/answerer button to access the answering system.
After you access the answering system, use the marked handset keys just
as if you were pressing the corresponding buttons on the base (see
"Answering System Operation" for details on functions). To make it easy
for you, the functions are listed on the handset above each number. For
example, to play messages:
36