Leaving A Memo; Telephone Set Up; Programmable Menus; Display Language - GE 25893 User Manual

3. To erase a message from the handset:
• Press answerer/delete button to enter into the handset remote
access operation.
• Press play/stop on the handset (the 2 button). The message plays.
• Press erase (the 0 button) to erase the message during message
playback.
NOTE: Erased messages cannot be restored.
L M
EAVING A EMO
Use the memo feature to leave a message.
1. Press and hold the memo button. You need to hold the button until you
finish the message.
2. Begin speaking after you hear the beep.
3. Release the memo button when you finish.
T
ELEPHONE
P
ROGRAMMABLE
There are four programmable menus available: Language, Local Area
Code, Tone/Pulse and Factory Default. When you program these settings,
make sure the phone is OFF ( not in talk mode).
D L
ISPLAY ANGUAGE
1. Press the program button until 1 ENGLISH 2 FRA 3 ESP shows in the display.
2. Use the CID/VOL left (-) or right (+) arrow button or the handset touch-
tone pad to enter your selection.
3. Press program to confirm.
NOTE: Press the EXIT button once to keep the previous setting and return to
the standby screen.
L A C
OCAL REA
1. Press the program button until SET AREA CODE shows in the display. The
default is - - -.
2. Use the handset touch-tone pad to enter the area code.
S U
ET P
M
ENUS
ODE
15