D
S
S
EFAULT
ETTING
ELECTION
1. Press the flash/program button until DEFAULT shows in
the display. NO is the default setting.
2. Use the
or
button or the number pad to move the
arrow to >NO or YES .
If you choose NO , the current settings remain. If you choose
YES , the unit resets to the factory default.
3. Press flash/program to confirm.
T
O
ELEPHONE
PERATION
M
A
C
AKING OR
NSWERING
ALLS
NOTE:
• The dialing pad is disabled when it is in the base
charging cradle. You must remove the dialing pad
from the base to make or answer a call.
• Placing the dialing pad in the base during a phone
call hangs up the phone.
• Always keep the headset plugged into the
dialing pad.
• You must use the headset to listen and talk.
Press the TALK/CALLBACK button on the dialing pad to get a dial
tone, to answer a call, or to hang up. Or dial the telephone
number first, and then press the TALK/CALLBACK button.
M
UTE
To have a private, off-line conversation use the mute feature.
The party on the telephone line will not hear you, but you can
still hear them.
1. Press the format/mute button on the handset. MUTE ON
shows in the display.
2. Press the format/mute button again to cancel mute and
return to your phone conversation.
R
EDIAL
While the phone is on, press the redial button to redial the
last number you dialed (up to 32 digits). If you get a busy
signal, and want to keep dialing the number, just press redial
again (you don't have to turn the phone off and back on).
F
LASH
Use the flash/program button to activate custom calling services
such as call waiting or call transfer, which are available through
your local phone company.
TIP: Don’t use the TALK/CALLBACK button to activate
custom calling services such as call waiting, or you’ll hang
up the phone.
I
U
I
L
N
SE
NDICATOR
IGHT
The CHARGE/IN USE indicator is lit when the dialing pad is
charging in the cradle on the base or when the phone is ON. It
flashes when you receive an incoming call, when the PAGE
button is pressed, or if the battery is not installed in the
battery compartment of the dial pad.
C
B
HANNEL
UTTON
While talking, you might need to manually change the channel
in order to get rid of static. Press and release the ch/delete
button to advance to the next channel.
T
T
D
EMPORARY
ONE
IALING
This feature is useful only if you use pulse dialing service.
Temporary tone dialing enables pulse (rotary) service phone
users to access touch-tone services offered by banks, credit
card companies, etc. For example, when you call your bank
you may need to enter your account number. Using the
temporary tone feature allows you to temporarily switch to
touch tone mode so you can enter and send your number.
1. Dial the telephone number and wait for the line
to connect.
2. When your call is answered, press the *tone/exit button on
the dialing pad to temporarily change from pulse dialing to
tone dialing.
3. Follow the automated instructions to get the information
you need.
4. To hang up, press the TALK/CALLBACK button on the
dialing pad, and the phone automatically returns to pulse
(rotary) dialing mode.
E
XIT
Press the *tone/exit button to cancel any command
you initiated.