Set Day - GE 55909320 User Manual

Most telephone systems use tone dialing, however, some may still use
pulse dialing. Depending on your telephone system, set the dialing mode
as follows:
1. Press the flash/program button until SET TONE/PULSE >1TONE 2PULSE
shows on the display. The default setting is TONE .
2. Use the touch-tone pad to select 1TONE or 2 PULSE , or press the cid/
messages (< or >) button to scroll to 1TONE or 2PULSE .
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
NOTE: If you aren't sure which dialing system you have, set the telephone to
tone dialing and make a test call. If the call connects, the setting is correct. If
the call does not connect, set the telephone to pulse dialing.
S D
ET AY
NOTE: This setting may only be made with the base.
NOTE: If you want to keep the current day, press the flash/program button
again to skip when the display shows SET DAY SU M T W H F S.
1. Press the flash/program button until SET DAY SU >M T W H F S shows
on the display. The default setting is M (Monday).
2. Press the cid/messages (< or >) to scroll to the day. M (MONDAY) is
default setting.
SET TONE/PULSE
1TONE 2PULSE
>

SET DAY

SU M T W H F s
>
15